1. Cut/tear required amount ( always wear rubber or plastic gloves ) and knead together to form a uniform colour, if mixing is difficult warm to room temperature or above.
   
   
2. Apply to prepared surface within 2 minutes of mixing.
   
   
3. To ensure a high bond strength, force well into cracks or holes, remove any excess material with a tool wetted with water.
   
   
4. To achieve a smooth appearance, rub with a wet gloved hand or damp cloth.
   
   
5. After 5-10 minutes it will form a tenacious bond, after 30-60 minutes it can be drilled or sawn, if required.
   

Avoid contact with skin, may cause sensitisation by skin contact. Wear suitable gloves. Harmful if swallowed. Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. All recommendations and suggestions are made without guarantee, since the conditions of use and application are beyond our control.